Log In / Sign Up

Highlight

  • New Arrivals
  • Sale
  • Hot items
-10%

MMS Water Purification at its Best Using Chlorine Dioxide!

30.60 34.00 

MMS

Water Purification at its Best Using Chlorine Dioxide!

It is a commonly known fact that any pool of water will sooner or later accumulate algae, bacteria, viruses and biofilms.

One of the most effective natural products that have been used for years to kill a wide variety of pathogens effectively.

This effective natural product is known as CHLORINE DIOXIDE.

MMS1

Description

MMS

Water Purification at its Best Using Chlorine Dioxide!

It is a commonly known fact that any pool of water will sooner or later accumulate algae, bacteria, viruses and biofilms.

One of the most effective natural products that have been used for years to kill a wide variety of pathogens effectively.

This effective natural product is known as MMS and when mixed together forms CHLORINE DIOXIDE.

At room temperature, Chlorine dioxide is a yellowish gas, that is water soluble and has a similar odour to chlorine.

Once dissolved in water this gas releases free oxygen – much in the same way as hydrogen peroxide will.

The potency of chlorine dioxide is that there are both oxygen and chlorine atoms bound in one molecule which makes it a HIGHLY POTENT oxidizer.

There are few pathogens that can withstand this highly potent compound – even the antibiotic resistant MRSA and COVID can be eradicated.

It is the compound of choice for water sanitation worldwide.

Checkout the video below to understand the mechanisms that Chlorine dioxide uses to kill the majority of pathogens.

MMS is a product that contains both sodium chlorite and hydrochloric acid, normally found in the stomach, to produce chlorine dioxide when mixed together.

It is a highly potent biocide for effectively eliminating bacteria, viruses, fungi, spores, algae, mites, parasites, biofilms and other pathogenic germs such as the dangerous Legionella.

100ml 25% sodium chlorite +

100 ml 4% hydrochloric acid (Ph. Eur.)

…in special pharmaceutical, pure amber glass bottles with dropper insert and child safety cap

Application description for disinfecting:
To disinfect, mix both components together drop by drop 1 to 1. Depending on the desired application, only make as much as is needed.
Prepare a new mixture before each disinfection.

Note: Never mix both bottles completely at once!!!
Response time: Depending on the temperature, approx. 30 seconds – 1 minute.
Production vessel: glass, ceramic vessel, no metal vessel!
Storage: Storage at normal room temperature, protected from light & dry.
Shelf life: 2 years.

All approvals of the product and their legally defined areas of use:
drinking water disinfectants, disinfectants for private use, disinfectants for the food and animal feed sector, biocidal products for veterinary hygiene.

Information on the water conditioner/drinking water disinfectant:
When the two liquid components (A & B) are activated, the biocide active ingredient chlorine dioxide is produced.

Caution: Use biocidal products with care. Always read the label and enclosed information sheet before use.

Sodium Chlorite Solution (25%)

Available in pharmaceutical grade amber glass bottle with dropper and child safety cap.

Other names: Sodium chloride, Naclo2
content: 25%, corresponds to DIN EN 938 Type 1
CAS number: 7758-19-2
EC number: 231-836-6 Storage
class: 8B
UN number: 1908

Safety Data Sheet: Download

GHS labeling:

Signal word Danger

Hazard statements:
EUH032 Contact with acids liberates very toxic gas.
H271 May cause fire or explosion, strong oxidizer.
H302 Harmful if swallowed.
H318 Causes serious eye damage.
H373 May cause damage to organs (Spleen) through prolonged or repeated exposure if swallowed.
H410 – Very toxic for water organisms with long-term effect.

General:
P102 Keep out of the reach of children.

Prevention:
P103 Read label before use.
P270 Do not eat, drink or smoke when using this product.
Avoid the release of P273 into the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response:
P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P305+ P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if possible. Continue rinsing.
P391 Collect spillage.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Protect against:
Heat. UV radiation / sunlight. Store upright and at normal room temperature.

General note:
This bottle alone is not a disinfectant, water conditioner or drinking water disinfectant. To produce chlorine dioxide, you also need an acid such as citric acid, lactic acid or hydrochloric acid. You can also order these in our online shop.

hydrochloric acid 4%

Our hydrochloric acid is Ph. Eur. – so it has European Pharmacopoeia quality.

Available in pharmaceutical grade amber glass bottle with dropper and child safety cap.

Other names: Hydrochloric acid, Acidum hydrochloricum
Content: 4%, made from hydrochloric acid according to Ph. Eur.
CAS number: 7647-01-0
EC number: 231-595-7
EC index number: 017-002-00- 2
Storage class: 8B
UN number: 1789

Safety Data Sheet: Download

GHS labeling:

Signal word: Warning

Hazard Statements:
H290 May be corrosive to metals.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

General:
P102 Keep out of the reach of children.

Prevention:
P260 Do not breathe dust/fume/gas/mist/vapours/spray.

Response:
P301+330+331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if possible. Continue rinsing.
P314 Get medical advice/attention if you feel unwell.

Protect against:
Heat. UV radiation / sunlight. Store upright and at normal room temperature.

Manufacturer: vitalundfitmit100 GmbH, Siemensstr. 10, 41363 Juechen

The company vitalundfitmit100 GmbH ensures that the raw material defined in the 59th CA Meeting for the production of EinsEinsSet’s, sodium chlorite, is obtained exclusively in the supply chain from the dossier owner for the 2nd generation system. This is on the Article 95 list. With this product, chlorine dioxide is produced in situ (on site) according to the 2nd generation system “Chlorine dioxide produced from sodium chlorite by acidification”.

 

MMS

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.

Be the first to review “MMS Water Purification at its Best Using Chlorine Dioxide!”

Your email address will not be published. Required fields are marked *